Industrial I/O from Japan, ready to order
Remote I/O modules, controllers and USB data acquisition units for automation and test. Specs, typical applications and live eShop pricing, grouped by product family.
Every card links to its eShop page for full specs, pricing and ordering.
Designed and built in Japan
Contec designs and manufactures its I/O hardware in-house.
Long lifecycle
7 to 10 year lifecycle support, so a validated system stays validated.
Isolation where it matters
Optocoupler and bus isolation on the models that need it.
Price on the page
Published pricing on the eShop. Spec it and order online.
CONPROSYS nano I/O modules
Compact I/O modules that snap onto a CONPROSYS nano controller or coupler. Add analog, temperature, counter, digital and relay channels one module at a time.
Key specs
- Analog input and output from 12 to 24-bit resolution
- Thermocouple, counter, digital and relay modules in one form factor
- DIN-rail system, built around the CONPROSYS nano head units below
Why customers choose it
- Buy only the channels you need
- Mix signal types on one controller
- Designed and built by Contec in Japan
Target markets and main applications
Target markets
- Factory automation and machine builders
- Building, energy and infrastructure monitoring
- System integrators adding remote I/O
Main applications
- Remote I/O for PLC and SCADA systems
- Temperature and process monitoring
- Machine status signals and alarms
- Data collection on existing equipment
CONPROSYS nano controllers and couplers
The head unit of every CONPROSYS nano system. It hosts the I/O modules and connects them to your network, controller or PC.
Key specs
- 4-slot and 8-slot versions
- Programmable option with IEC 61131-3 (CODESYS) and Modbus
- Network couplers plus a USB coupler for PC-based setups
Why customers choose it
- Pick the head unit that fits the network you already run
- One family of I/O modules across every head unit
- Compact DIN-rail footprint
Target markets and main applications
Target markets
- OEMs and machine builders
- System integrators
- Plant and test engineering teams
Main applications
- Distributed I/O over Ethernet
- Light control logic at the edge
- Adding I/O to an existing PLC or SCADA system
- PC-based test benches over USB
Power and accessories
The parts that complete an order: power supplies for CONPROSYS systems, a power cord and mounting hardware for USB I/O units.
Key specs
- 24VDC power supplies, 30W and 90W
- AC power cord
- Mounting bracket for X series USB units
Why customers choose it
- Matched to Contec hardware
- One supplier, one order
Target markets and main applications
Target markets
- Anyone ordering the systems on this page
Main applications
- Complete panel builds in a single order
USB analog I/O
Plug-and-measure analog units that connect to a PC over USB 2.0. From compact 8-channel inputs to 500 kS/s multifunction units.
Key specs
- 12 and 16-bit resolution, sampling up to 500 kS/s
- Input, output and multifunction models
- Bus-isolated N series options
Why customers choose it
- Price on the page, order online
- Isolation on the models that need it
- Designed and built by Contec in Japan
Target markets and main applications
Target markets
- Test and measurement
- R&D and university labs
- Production and end-of-line test
Main applications
- Sensor and signal acquisition
- Test stands and fixtures
- Analog control of valves and actuators
- Data logging
USB digital I/O, relay and counter
Digital I/O units for PCs over USB, from 8 to 128 channels. Isolated 12 to 24VDC models for the plant floor, TTL models for the bench, plus relay and counter units.
Key specs
- 8 to 128 channels per unit
- Optocoupler isolation on 12 to 24VDC models
- Relay, reed relay and 32-bit counter units
Why customers choose it
- Scale the channel count without changing platform
- Isolation built in where the signal needs it
- Price on the page, order online
Target markets and main applications
Target markets
- Factory automation
- Test and measurement
- Machine builders and labs
Main applications
- Reading switches and sensors
- Driving lamps, solenoids and relays
- Pulse and encoder counting
- Test fixture control
USB serial, CAN and GPIB
Add RS-232C, RS-422A/485, CAN or GPIB ports to any PC through USB, so existing instruments and equipment stay in service.
Key specs
- 1 and 4-port serial units
- Isolation and surge protection option
- CAN 2.0B, 2ch, and USB to GPIB
Why customers choose it
- Keeps legacy equipment in service
- Industrial build quality from Japan
- Price on the page, order online
Target markets and main applications
Target markets
- Test and measurement
- Automotive and mobility
- Industrial equipment with serial interfaces
Main applications
- Connecting serial instruments and PLCs to new PCs
- CAN bus monitoring and testing
- GPIB instrument control in test racks
Lead times may vary for products shipped from Japan
Products sourced from Japan may take between 4 to 5 weeks to arrive. We will provide updated shipping timelines upon order confirmation.
Talk to us
Tell us what you need to measure or control
We will help you pick the right modules, confirm availability and put together a quote for volume orders.
Account Executive, Contec Americas Inc.
James Hsu
Company contact
Contec Americas Inc.