CPSN-COM-1PD2

Contact Sales Department for Pricing New Serial Communication RS-422A/485 921,600 bps Bus Isolation CONPROSYS nano VCCI-A · FCC-A · CE · UKCA RS‑422A/485 serial communication for CONPROSYS nano. The CPSN‑COM‑1PD and CPSN‑COM‑1PD2 provide one channel of serial communication with baud rates up to 921,600 bps. Features bus isolation, surge protection,...
Proveedor: Contec Americas
Código: LRLU471
Disponibilidad: En stock
Tipo de producto: Accessory
₡ 34.074,62
₡ 43.292,60
₡ 34.074,62
Total parcial: ₡ 34.074,62
📋

Datasheet

CPSN-COM-1PD2

Download PDF

Envío gratis

Envío estándar gratuito en pedidos superiores a $500

Pagos seguros

Procesamiento compatible con PCI DSS

Los precios están sujetos a cambios según las tarifas aplicables.

Los precios están sujetos a cambios según los aranceles y derechos de importación aplicables. Notificaremos a los clientes sobre cualquier cambio de precio antes de la confirmación del pedido.

Lead times may vary for products shipped from Japan:

Products sourced from Japan may take between 4 to 5 weeks to arrive. We will provide updated shipping timelines upon order confirmation.

New Serial Communication RS-422A/485 921,600 bps Bus Isolation CONPROSYS nano VCCI-A · FCC-A · CE · UKCA

RS‑422A/485 serial communication for CONPROSYS nano. The CPSN‑COM‑1PD and CPSN‑COM‑1PD2 provide one channel of serial communication with baud rates up to 921,600 bps. Features bus isolation, surge protection, 64‑byte FIFO buffers, and support for full/half duplex. Wide temperature range (-20 to +60°C) and tool‑less installation. From Contec Americas.

1 RS-422A/485 Channel
921.6 kbps Max Baud Rate
500 VAC Isolation
‑20 to +60°C Operation
Contec Americas · CONPROSYS nano
CPSN‑COM‑1PD / 1PD2
RS‑422A/485 Serial · 921,600 bps · Bus Isolation · Surge Protection
View Collection

High‑Speed RS‑422A/485
Serial Communication

The CPSN‑COM‑1PD and CPSN‑COM‑1PD2 are expansion I/O modules for the CONPROSYS nano series, adding one channel of RS‑422A/485 serial communication. With baud rates up to 921,600 bps, bus isolation (500VAC), and 64‑byte FIFO buffers, these modules are ideal for industrial automation, SCADA, and device control applications. Full‑duplex and half‑duplex modes are supported with on‑board DIP switch configuration.

Serial Features
  • 1 channel RS‑422A/485
  • 921,600 bps max
  • Full/Half duplex
  • 64‑byte Tx/Rx FIFO
  • Bus isolation (500VAC)
Key Features
  • ‑20 to +60°C operation
  • Tool‑less installation
  • Surge protection
  • No electrolytic capacitors
  • LED status indicators

Two model variants – CPSN‑COM‑1PD supports baud rates from 4 to 921,600 bps. CPSN‑COM‑1PD2 supports baud rates from 110 to 921,600 bps. Both support data lengths of 5‑8 bits and stop bits of 1, 1.5, or 2.


Built for Harsh
Industrial Environments

Designed for demanding factory automation, remote monitoring, and device control applications. The CPSN‑COM‑1PD/1PD2 operate across a wide temperature range (-20 to +60°C) and feature bus isolation and surge protection for reliable communication in noisy industrial environments. The module installs and removes without tools, simplifying system maintenance.

  • Wide temperature range – Operates from -20 to +60°C for installation in diverse environments.
  • Bus isolation – 500VAC isolation protects the system from ground loops and transients.
  • Surge protection – Gas discharge tube arrester and TVS diode provide robust protection against voltage surges.
  • Long life design – No electrolytic capacitors, which have limited operational life.
  • Tool‑less installation – Easily install and remove from the CPU unit without any tools.

Full Specifications

Specification Detail
Model CPSN-COM-1PD / CPSN-COM-1PD2
Number of channels 1 channel
Transmission scheme Asynchronous serial (Full Duplex/Half Duplex)
Interface type RS‑422A/485
Isolation Bus isolation (500VAC)
Baud rate (1PD) 4 – 921,600 bps
Baud rate (1PD2) 110 – 921,600 bps
Data length 5, 6, 7, 8 bits (software selectable)
Stop bits 1, 1.5, 2 (software selectable)
Parity check Even, Odd, Non‑parity
Buffers 64‑byte receive, 64‑byte transmit FIFO
Connector 2 pieces, 3.81mm pitch, 10‑pin terminal
Applicable wire AWG28 – 16
Switch 6‑pole (Full/Half Duplex), 4‑pole (Terminator ON/OFF)
Surge protection TVS diode (±13V, 400W) + Gas discharge tube (300V, 2000A)
LED Transmission (Green), Reception (Green)
Power consumption 5V 250mA (max), 3.3V 20mA (max)
Dimensions (mm) 15.6(W) × 52.6(D) × 84(H) (excluding protrusions)
Weight 50g
Operating temperature -20 to +60°C (depending on installation angle)
Operating humidity 10 – 90%RH (no condensation)
Standards VCCI Class A, FCC Class A, CE (EMC Class A, RoHS), UKCA, ISED
Included items Product, 10‑pin connector, manual
Datasheet version As of May 2026

Optional Accessories

Product Name Model Description
Remote I/O CPU unit (4‑slot) CPSN-MCB271-S1-041 LAN 1‑channel
Remote I/O CPU unit (8‑slot) CPSN-MCB271-1-041 LAN HUB
Remote I/O CPU unit LAN HUB, 8‑slot CPSN-MCB271-1-081
CODESYS Modbus Master CPU unit CPSN-PCB271-S1-041
Remote I/O CPU unit EtherCAT, 4‑slot CPSN-E0B471EC-41
Remote I/O CPU unit EtherCAT, 8‑slot CPSN-E0B471EC-81
USB I/O Unit – Module Type (4‑slot) CC-LSB271-CPSN4
DIN rail fitting power supply 30W CPS-PWD-30AW24-01 Input: 100‑240VAC, Output: 24VDC 1.3A
DIN rail fitting power supply 90W CPS-PWD-90AW24-01 Input: 100‑240VAC, Output: 24VDC 3.8A

Visit the CONTEC website for the latest optional products and compatible CPU units.


Certifications and
Compliance

  • VCCI Class A — Japanese voluntary control for electromagnetic interference (commercial/industrial environments).
  • FCC Class A — U.S. emissions compliance for industrial use environments.
  • CE (EMC Directive Class A, RoHS Directive) — European conformity for electromagnetic compatibility and restriction of hazardous substances.
  • UKCA — UK Conformity Assessed marking for UK market compliance.
  • ISED — Innovation, Science and Economic Development Canada compliance.

Ready to add RS‑422A/485 serial to your CONPROSYS nano system?

The CPSN‑COM‑1PD and CPSN‑COM‑1PD2 are available through Contec Americas on a quote basis. Contact our sales team to discuss model selection, quantity, accessories, and integration with your industrial automation systems.

Tags CPSN-COM-1PD CPSN-COM-1PD2 CONPROSYS nano Serial I/O Module RS-422A RS-485 Serial Communication Industrial Automation SCADA Modbus Contec CPSN Wide Temperature Bus Isolation 921600 bps

Productos relacionados

Productos vistos recientemente