The DIO-0808TY-USB is a USB2.0-compatible terminal that expands the input or output function of a PC for digital signals. Being bus-powered, it does not need an external power supply. It has the 8ch of unisolated TTL level input and 8ch of unisolated open-collector output....

Contact Sales Department for Pricing New CPSL-08P1EN 8-Channel IO-Link Master Multi-Protocol Support IP67 -20 to +60°C M12 Connectors VCCI-A · FCC-A · CE · UKCA 8‑channel IO‑Link master module (Class A) with multi‑protocol support for PROFINET, EtherNet/IP, Modbus TCP, CC‑Link IE Field Basic, EtherCAT,...

Contact Sales Department for Pricing New DIO-1616TL-PE 16 Input · 16 Output TTL Level 200 nsec Response Low Profile / Standard Interrupt · Digital Filter VCCI-A · FCC-A · CE · UKCA 16 non-isolated TTL level inputs and 16 non-isolated open‑collector outputs on a...

Contact Sales Department for Pricing New 1N Series USB I/O 8-Ch Relay Output 8-Ch Opto-Isolated Input 6A 240VAC Output USB 2.0/1.1 Independent Commons VCCI-A · CE · UKCA USB 2.0 digital I/O unit featuring 8 channels of opto-coupler isolated inputs (12-24VDC) and 8 channels...

This USB 2.0-compatible digital I/O terminal can be connected to a USB interface of a PC to provide input and output digital signals (12 - 24 VDC) easily. It allows input for up to eight channels as well as eight output channels. This unit...

Contact Sales Department for Pricing New PIO-16/16L(PCI)H 16 Isolated Inputs 16 Isolated Outputs 12‑24VDC Current Sink I/O Interrupt on all inputs VCCI-A · FCC-A · CE · UKCA 16 opto‑isolated inputs (current sink compatible) and 16 opto‑isolated open‑collector outputs (current sink type) on a...

Contact Sales Department for Pricing New PIO-32/32L(PCI)H 32 Isolated Inputs 32 Isolated Outputs 12‑24VDC Current Sink I/O Interrupt on 32 inputs VCCI-A · FCC-A · CE · UKCA 32 opto‑isolated inputs (current sink compatible) and 32 opto‑isolated open‑collector outputs (current sink type) on a...

Contact Sales Department for Pricing New CPS-MG341-ADSC1-931 M2M Gateway for PLC OPC UA Server Multi-Vendor PLC Support -20 to +60°C Isolated I/O VCCI-A · FCC-A · CE · UKCA M2M Gateway for PLC with OPC UA server, supporting multi‑vendor PLCs and Modbus devices simultaneously....

This expansion I/O module adds an opto-coupler isolated input interface with a response speed of 200 μs or less to the CPU unit of the CONPROSYS nano series. The CPSN-DI-08L is equipped with 8 inputs and 1 common that support current sink/source output. This...

Contact Sales Department for Pricing New CONPROSYS nano Digital Input Module 8-Ch Opto-Isolated 200µs Response Current Sink/Source Interrupt Support VCCI-A · FCC-A · CE · UKCA 8-channel opto-coupler isolated digital input module for the CONPROSYS nano series. Features 200µs response time, interrupt support on...

This expansion I/O module adds an opto-coupler isolated input interface with a response speed of 200 μs or less to the CPU unit of the CONPROSYS nano series. The module is equipped with 16 inputs and 1 common that supports current sink/source output. The...

Contact Sales Department for Pricing New CONPROSYS nano Analog Input Module 12-Bit Resolution 8-Ch / 4-Ch Input Bus Isolated ±10V · ±5V · ±2.5V · 0-10V VCCI-A · FCC-A · CE · UKCA 12-bit analog input module for the CONPROSYS nano series. Provides 8...

This Ethernet gateway converts Ethernet into wireless in the Sub-1GHz band. Data from the Wireless I/O series terminal (Slave) can be sent to a PC via Ethernet, or PC received data can be sent via Ethernet. The long-distance communication capability thanks to the wireless Sub-1GHz...

DIO-1616HN-USB | 16-Channel Isolated USB Digital I/O | Contec Americas Contact Sales Department for Pricing New DIO-1616HN-USB 16 Isolated Inputs 16 Isolated Outputs 5‑50VDC USB Isolated Internal Input Power VCCI-A · FCC-A · CE · UKCA 16 opto‑isolated inputs (current sink compatible) and 16...

Contact Sales Department for Pricing New USB I/O 16-Ch Isolated Input 16-Ch Isolated Output USB Hub Function 12-24 VDC I/O Interrupt Support VCCI-A · CE · UKCA USB 2.0 digital I/O unit featuring 16 opto-coupler isolated inputs and 16 opto-coupler isolated open-collector outputs (12-24VDC)....

Contact Sales Department for Pricing New PCI I/O 16-Ch Isolated Input 16-Ch Isolated Output Low-Profile/Standard PCI 12-24 VDC I/O Interrupt Support VCCI-A · CE · UKCA PCI digital I/O board featuring 16 opto-coupler isolated inputs and 16 opto-coupler isolated open-collector outputs (12-24VDC). Supports low-profile...

DIO-3232L-PE | 32-Channel Isolated Digital I/O Board | Contec Americas Contact Sales Department for Pricing New DIO-3232L-PE 32 Isolated Inputs 32 Isolated Outputs 12‑24VDC Current Sink I/O Interrupt on all inputs VCCI-A · FCC-A · CE · UKCA 32 opto‑isolated inputs (current sink compatible)...

Contact Sales Department for Pricing New CNT32-8M-PE 8 Counter Channels 32-bit Up/Down 10 MHz Input Differential / TTL Input Disconnection Detection VCCI-A · FCC-A · CE · UKCA PCI Express 8‑channel 32‑bit high‑speed up/down counter board. Supports 10 MHz pulse input with differential line...

This is a mounting bracket for the Contec USB I/O Terminal series.  BRK-USB-Y Datasheet BRK-USB-Y User Manual

The PCA96PS-P is a cable used to connect the signal of an external apparatus with the 96-pin half-pitch connector of a Contec interface card. Type: Shielded (straight)Connector (module): 1.27mm pitch 96-pin (female)Connector (external): none (1.27mm pitch lamination) Ordering Information PCA96PS-0.5P: 0.5m one end connector shield...

The PCB96PS-P is a two-ended cable that connects a 96-pin half-pitch connector to a 96-pin half-pitch connector on an interface card made in the United States. Type: Shielded (straight) Connector (module): 1.27mm pitch 96-pin (female)Connector (external): 1.27mm pitch 96-pin (female) Ordering Information PCA96PS-0.5P: 0.5m two-ended connector shield cable...

The PCB37PS-P is a shield cable for a 37pin D-SUB connector -> 37pin D-SUB connector. Type Shielded (straight) Connector (module) D-SUB 37-pin (male) Connector (external) D-SUB 37-pin (male) Model Description / Certification PCB37PS-0.5P 37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost PCB37PS-1.5P 37pin D-type(M) at Each...

PCA68PS-P is a cable for connecting the signal of the 68pin 0.8mm pitch connector and external apparatus CONTEC PC card. Type Shielded (straight) Connector (module) 0.8mm-pitch 68-pin (male) Connector (external) none (1.27mm-pitch lamination)   Ordering Information PN PCA68PS-0.5P: 68pin 0.8mm Pitch Connector to Open-Ended, Shield...

The PCE37/9PS connects with CN1 (37 pin D-SUB connector) of a serial I/O card. It is a 9-pin D-SUB connector [M (male) type] of 4 channels.  Type: Shielded (straight)Connector (module): D-SUB 37-pin (male)Connector (external): 4x D-SUB 9-pin (male) Ordering Information PCE37/9PS Divider shield cable, D-SUB 37-pin ->...

The PCA50PS-P is a cable that connects the signal of an external device to a 50pin miniature ribbon connector of a Contec interface card. Type: Shielded (straight)Connector (module): Miniature ribbon 50-pinConnector (external): none (1.27mm pitch lamination) Ordering Information PCA50PS-0.5P: 0.5m 50pin miniature ribbon connector to Open-Ended,...

This expansion I/O module adds a thermocouple interface to the CPU unit of the CONPROSYS nano series. Each module offers four channels of differential inputs.  Compatible with various types of thermocouple inputs  This module is compatible with a wide range of thermocouple input types...

This digital I/O terminal sends I/O digital signals wirelessly in the Sub-1GHz band. Thanks to the capability of long-distance communications in the Sub-1GHz band, and mesh support, the module is suitable for controlling and monitoring devices that are spread in the wide area.  The...

The PCB96WS-P is a 96 pin half -> 37 pin D-SUB(male) conversion shield cable (1.5m). Type: Shielded (straight) Connector (module): 1.27mm pitch 96-pin (female)Connector (external): 2x D-SUB 37-pin (male) Ordering Information PCA96WS-1.5P: 1.5m  PCA96WS-3P: 3m PCA96WS-5P: 5m 

This analog input terminal sends input analog signals wirelessly in the Sub-1GHz band. Thanks to its long-distance communications in the Sub-1GHz band capability, and mesh support, this module is suitable for controlling and monitoring devices that are spread in a wide area.  Four 10-bit...

The AI-1608xIN is an Ethernet-compatible unit with analog inputs. Its compact design (188.0(W)×78.0(D)×30.5(H)mm) ensures easy installation, whether on the floor, wall-mounted, or integrated into equipment using the DIN rail. With support for Windows/Linux device drivers, compatibility is seamless. It features 8 channels of 16-bit...

The AO-1604xIN is an Ethernet-compatible unit with analog outputs. Its compact design (188.0(W)×78.0(D)×30.5(H)mm) ensures easy installation, whether on the floor, wall-mounted, or integrated into equipment using the DIN rail. With support for Windows/Linux device drivers, compatibility is seamless. It features 4 channels of 16-bit...

Contact Sales Department for Pricing New CONPROSYS nano Digital Output Module 8-Ch Source Type 200µs Response 500mA per Channel Surge Protection VCCI-A · FCC-A · CE · UKCA 8-channel opto-coupler isolated digital output module for the CONPROSYS nano series. Features current source output, 500mA...

The CONPROSYS nano Series CPSN-DI-08BL is a compact digital input module with built-in power designed for industrial automation and control applications. This module is part of Contec Americas' CONPROSYS nano product line, offering digital input capabilities for system integration. Contact Sales Department for Pricing...

The CPSN-DO-08BL is a digital output module from the CONPROSYS nano Series manufactured by Contec Americas. This compact industrial module features a built-in on-board power supply with isolated 12VDC output for reliable signal processing in automation applications. Contact Sales Department for Pricing Built‑in Power...

The CONPROSYS nano Series CPSN-AI-1208LI is a compact analog input module designed for industrial applications. This module is part of the CONPROSYS nano product line from Contec Americas, offering analog input capabilities for automation and control systems. Contact Sales Department for Pricing 12 Bit...

Contact Sales Department for Pricing New Analog Output 4-Ch 16-Bit Channel Isolation Voltage/Current per Channel PCI Bus VCCI-A · CE · UKCA 4 isolated analog outputs, 16-bit resolution, 20µsec conversion. The AO-1604CI3-PCI is a PCI bus board that extends your PC with four independent...

Contact Sales Department for Pricing New USB2.0 16-bit Analog Input 8 Channels 10µsec/ch Bus Powered VCCI-A · FCC-A · CE · UKCA High-resolution 16-bit analog input for USB. The AI‑1608AY‑USB delivers 8 single‑ended channels at 10µsec/ch conversion, plus 4 digital I/O. Bus‑powered, compact, and...

Contact Sales Department for Pricing New USB Digital I/O 32 Inputs / 32 Outputs Opto‑Isolated USB Hub 12‑24 VDC VCCI-A · CE · UKCA 32 opto‑isolated inputs and 32 open‑collector outputs in a single USB unit. The DIO‑3232LX‑USB supports 12‑24 VDC I/O, interrupt on...

Contact Sales Department for Pricing New Analog Input 4 Channels 16‑Bit Differential CONPROSYS nano VCCI-A · FCC-A · CE · UKCA 4‑channel 16‑bit differential analog input for CONPROSYS nano. The CPSN‑AI‑1604LI supports voltage and current input (software‑selectable ranges), bus isolation, wide temperature range (-20...

Contact Sales Department for Pricing New Digital Input 8 Channels 1µsec Response Opto‑Isolated CONPROSYS nano VCCI-A · FCC-A · CE · UKCA 8‑channel high‑speed opto‑isolated digital input for CONPROSYS nano. The CPSN‑DI‑08FCL delivers 1µsec response, interrupt on all inputs, pulse catch, pulse measurement, 16‑bit...

Contact Sales Department for Pricing New Digital Input 8 Channels 1µsec Response Reverse‑Common CONPROSYS nano VCCI-A · FCC-A · CE · UKCA 8‑channel high‑speed opto‑isolated digital input with reverse‑common (current source) support. The CPSN‑DI‑08FCRL delivers 1µsec response, interrupt on all inputs, pulse catch, pulse...

Contact Sales Department for Pricing New Digital Output 8 Channels Push‑Pull 1µsec Response CONPROSYS nano VCCI-A · FCC-A · CE · UKCA 8‑channel isolated push‑pull digital output module for CONPROSYS nano. The CPSN‑DO‑08FPW delivers 1µsec response, 500mA per channel, and supports 5‑24 VDC. Features...

Contact Sales Department for Pricing New CONPROSYS nano Digital Output Module 8-Ch Opto-Isolated 200µs Response 500mA per Channel Surge Protection VCCI-A · FCC-A · CE · UKCA 8-channel opto-coupler isolated digital output module for the CONPROSYS nano series. Features 200µs response time, 500mA output...

Contact Sales Department for Pricing New CONPROSYS nano Digital Output Module 8-Ch Source Type 200µs Response 500mA per Channel Surge Protection VCCI-A · FCC-A · CE · UKCA 8-channel opto-coupler isolated digital output module for the CONPROSYS nano series. Features current source output, 500mA...