
Contec Americas Inc. / Accessory
CNT24-4(PCI)H 4Ch 24Bit Up/Down Counter Board for PCI
Contact Sales Department for Pricing New CNT24-4(PCI)H 4 Counter Channels 24-bit Up/Down 500 kHz / 1 MHz Input Opto-Isolated / TTL Input Count Match Output VCCI-A · FCC-A · CE · UKCAPCI 4‑channel 24‑bit up/down counter board. Select...
Read full descriptionHide description
PCI 4‑channel 24‑bit up/down counter board. Select opto‑isolated (500 kHz) or TTL‑level (1 MHz) input per channel. Count 2‑phase (rotary encoder) or single‑phase signals. Count match interrupt and one‑shot output. Programmable timer for periodic interrupts.
4‑Channel 24‑Bit
Up/Down Counter
The CNT24‑4(PCI)H provides four 24‑bit up/down counter channels on a PCI board. It supports opto‑isolated (500 kHz) or TTL‑level (1 MHz) input selection per channel. Counts 2‑phase (quadrature) or single‑phase signals from rotary encoders, linear scales, and other pulse sources.
- 4 independent 24‑bit counters
- Opto-isolated or TTL input (software select)
- 500 kHz (opto) / 1 MHz (TTL) max input
- 2‑phase or single‑phase counting
- General‑purpose input per channel
- Count match interrupt (per channel)
- One‑shot match output (opto-isolated)
- Programmable timer (1 ms – 200 sec)
- Digital filter per channel
- PCI Universal key (requires +5V)
Flexible input selection — each channel can be independently configured for opto‑isolated or TTL‑level input via software. Count match events can generate interrupts and/or output pulses.
Built for Precision Counting
-
Flexible input — opto‑isolated (500 kHz) or TTL (1 MHz) input per channel; software selectable.
-
Count match — generate interrupt and/or one‑shot output when count matches preset value.
-
Programmable timer — 1 ms to 200 sec for periodic interrupt generation.
-
Digital filter — programmable per channel (0.1 µsec to 1056.1 µsec) to reject noise.
-
General‑purpose input — one per channel (opto‑isolated and TTL‑level).
-
Universal key PCI — compatible with 3.3V and 5V slots (requires +5V supply).
Full Specifications
| Item | Specification |
|---|---|
| Model | CNT24‑4(PCI)H |
| Counter channels | 4 |
| Count system | Up/down counting |
| Max count | FFFFF (24‑bit binary) |
| Input type | Opto‑isolated or TTL‑level (software selectable per channel) |
| Input signals | Phase‑A/UP ×4, Phase‑B/DOWN ×4, Phase‑Z/CLR ×4, General‑purpose input ×4 |
| Input response frequency | Opto‑isolated: 500 kHz max; TTL: 1 MHz max (50% duty) |
| Digital filter | 0.1 µsec – 1056.1 µsec (independent per channel) |
| Timer | 1 msec – 200 sec |
| Match signal output | 1 per channel, opto‑isolated open collector, 35 VDC 50 mA max |
| External power (opto input) | 5‑12 VDC ±10%, 400 mA min |
| External power (match output) | 5‑12 VDC ±10% |
| Bus interface | 32‑bit, 33 MHz PCI (Universal key, requires +5V) |
| Power consumption | 5 VDC, 250 mA max |
| Connector | Opto‑isolated: 37‑pin D‑SUB (CN1); TTL: 30‑pin header (CN2) |
| Dimensions (L × H) | 121.69 × 105.68 mm (varies by board number) |
| Weight | 130 g |
| Operating temperature | 0‑50°C |
| Operating humidity | 10‑90% RH (no condensation) |
| Certifications | VCCI Class A, CE (EMC Class A, RoHS), UKCA |
Connector & Cabling
The board uses two connectors: CN1 for opto‑isolated inputs (37‑pin D‑SUB) and match outputs, and CN2 for TTL‑level inputs (30‑pin header). CN1 includes phase inputs, general‑purpose inputs, common pins, and match outputs. CN2 provides TTL inputs with +5V output (500 mA max).
-
CN1 (Opto‑isolated) — 37‑pin D‑SUB: phase A/B/Z inputs, general‑purpose inputs, plus common, match outputs.
-
CN2 (TTL‑level) — 30‑pin header: phase A/B/Z inputs, general‑purpose inputs, Vcc (+5V output), GND.
-
Vcc output — +5V power (500 mA max) for external devices such as encoders.
-
Optional cables — shielded/flat 37‑pin D‑SUB cables (PCB37PS, PCB37P), 30‑pin to 37‑pin conversion cable (D7/B2).
-
Terminal boards — EPD‑37A (M3 spring‑up), EPD‑37 (M3.5), DTP‑4C.
Certifications & Compliance
-
VCCI Class A — Japanese EMC for commercial/industrial environments.
-
FCC Class A — U.S. emissions compliance for industrial use.
-
CE (EMC Directive Class A + RoHS) — European conformity.
-
UKCA — UK conformity assessed.
Optional Accessories
| Part Number | Description |
|---|---|
| PCB37PS‑0.5P | Shielded cable, 37‑pin D‑SUB both ends, 0.5m |
| PCB37PS‑1.5P | Shielded cable, 37‑pin D‑SUB both ends, 1.5m |
| PCB37PS‑3P | Shielded cable, 37‑pin D‑SUB both ends, 3m |
| PCB37PS‑5P | Shielded cable, 37‑pin D‑SUB both ends, 5m |
| PCB37P‑1.5 | Flat cable, 37‑pin D‑SUB both ends, 1.5m |
| D7/B2 | Flat type conversion cable (30‑pin header to 37‑pin D‑SUB) with bracket, 0.5m |
| EPD‑37A | Screw terminal (M3 × 37P, spring‑up) |
| EPD‑37 | Screw terminal (M3.5 × 37P) |
| DTP‑4C | Screw terminal |
Software & Packing List
| Item | Description |
|---|---|
| Windows driver | API‑CNT(WDM) – Win32 API, samples (C#, VB.NET, VC++, Python), diagnostic tool |
| Linux driver | API‑CNT(LNX) – shared library, gcc (C/C++) and Python samples, config tool |
| SDK & support | Additional software tools available for download |
| Packing List | Product ×1, "Please read the following" document |
Ready to add high‑speed counting capability?
The CNT24‑4(PCI)H is available through Contec Americas on a quote basis. Contact our sales team for volume pricing, cable assemblies, and integration support.
Taxes and shipping calculated at checkout.
Lead times may vary for products shipped from Japan:
Products sourced from Japan may take between 4 to 5 weeks to arrive. We will provide updated shipping timelines upon order confirmation.
Product resources
